DIY Fabric Scrap Letter
A step-by-step DIY for a fabric scrap letter.
A surefire way to infuse a little more of 'you' into your wedding? Roll up your sleeves and put on your DIY hat. In fact, we have a whole section dedicated to DIY projects we love, and today, we're adding this super fun fabric scrap letter to the list. Keep reading for the how-to from Blue Magpie Invitations!
If you happen have some extra fabric laying around, here's a fun DIY from Blue Magpie Invitations that's simple yet packs a big, beautiful punch!

Depending on the fabrics you choose, your project can be anything from the centerpiece of an awesome wedding dessert table, to baby nursery decor, to a welcoming wreath on your front door. You can even get ambitious and try for a monogram or perhaps a whole name!

Here are step-by-step instructions on how to make your own fabric scrap letter. Our “B” is 24” X 15”, and we’ve given you materials and quantities based on this letter. You can adjust your materials and make yours bigger, smaller, or skip the letter altogether and make a heart or other shape instead!
Materials

20” X 30” X ½” foam board (available at Michael’s or other craft store)
1 yard of a neutral fabric (we used a sand-colored linen) to cover the letter form
3 yards total of coordinating fabrics torn or cut into squares and rectangles (we used five different fabrics plus a lace)
7 yards of 1.75″ wide lace ribbon (you can use whatever ribbons you have on hand, a mix of different colors is fun, too!)
Serrated knife (serrated is better at “sawing” through the foam board)
Pencil
Scissors
A strong glue (like E6000)
Ruler
Thumbtacks

instructions

step-1Cut out your letter.

The simplest way to do this is to sketch your letter onto the foam board with a pencil. Don’t worry too much about getting it absolutely perfect as the letter will be covered in fabric and then adorned with scraps.
Another option, if you have access to Illustrator and a printer, is to open a document as large as your printer will print and then make your letter as large as you’d like. If your letter is bigger than the printable area, move it around on the artboard and print it out in sections. Make sure to overlap some portions of the letter, so it will be easy to piece and tape the individual pages together on your foam board.

Once your letter form is on your board, carefully cut the letter out with a serrated knife using a gentle sawing motion.

step-2Tear or cut your fabrics and ribbons. I love to use linen or printed cotton for this project because they are the easiest to tear and you get lovely, frayed edges. All you do is make a small snip with your scissors and rip away! If you’re using a different type of fabric or ribbon that doesn’t tear so well, just cut.
First, tear or cut the neutral fabric you are using to cover the letter into approximately 3” wide strips. Next, tear or cut the other fabrics or ribbons into various square and rectangular sizes. Keep them somewhere in the 3” to 4” range, but aim to vary them a little bit. These absolutely do not need to be perfect! In fact, it’s better if there’s a lot of variation because it will allow each fabric to show through when they are layered.

step-3Wrap your letter.
Take your neutral fabric strips and wrap the foam letter. There’s no nifty trick or secret to this; just start wrapping and aim to cover the entire letter, overlapping the fabric strips where needed. Use thumbtacks to keep the fabric in place.

step-4Group your fabric swatches.
Gather your swatches in groups of three or four and layer them on top of each other. Make sure to rotate the pieces so that they are not all lined up perfectly. Pin them together with a tack.

step-5Pin the fabric layers to your letter.
Starting from one corner, start tacking your fabric swatches to your foam letter. Squeeze a little dab of glue for each tack as you pin it down. As you move along, pin each new bundle of fabric close to the previous bundle.

The closer you pin each bundle, the more dense your fabric letter will be (and the more fabric you’ll need). At a minimum, keep your pins close enough that fabric folds keep your thumbtacks hidden. Keep pinning fabric bundles until the front of your letter is completely covered.
Voila! And there you have it, your very own fabric scrap letter! And if you'd like a little help getting started, Blue Magpie has put together some DIY kits in their Etsy shop with beautiful color-coordinated bundles of fabric and ribbon to get you that much closer to having a personal, handmade addition to your home or event!
Vendor Credits